•Easy To Use Pint Size Vinyl Flooring Seam Sealer Kit With Applicator Bottle - Standard Gloss
•Repair / Seal Minor Cuts & Chemical Weld Vinyl Floor Seams
•For Use On All Vinyl Flooring With A Vinyl Wearlayer - Not For Use On Vinyl With Urethane-Based Wear Layers
•No Mixing, 1 Part, Standard Gloss - Will Seal Approximately 400-600 Lineal Feet of Seams
•Comes with 4-ounce bottle with versatile vinyl flooring seam sealing tip & cleaning pin
You are purchasing 1 Pint of Mannington MSS 20 Standard Gloss Vinyl Flooring Seam Sealer & 1 Professional Seam Applicator Bottle . ABOUT THE SEALER: Mannington MSS 20, 1 part, Standard Gloss Vinyl Flooring Seam Sealer is designed for seam sealing all resilient vinyl flooring products with a vinyl wearlayer A properly sealed seam will be as strong as the surface of the floor covering and will remain intact for the life of the floor. ABOUT THE APPLICATOR BOTTLE: The Professional Seam Sealer Applicator Bottle contains a 4-ounce bottle, a tip cleaning pin, and the Versatile Sealing Tip. The Professional Seam Sealer Applicator Bottle is intended to be used for liquid-weld seam sealing of vinyl flooring. The ergonomic design and specially engineered tip help apply the appropriate amount of seam sealer while completely penetrating the seam cut for all Commercial sheet flooring applications. Prior to sealing seams in all products, make certain that all seams are clean, dry, and free of adhesive contamination. DIRECTIONS FOR USE: Before sealing the seam, make certain all seams are clean, dry, and free of adhesive contamination. Fill the bottle at least 2/3 full of sealer. Allow applicator bottle to stand until all air bubbles have dispersed. Before using, check the flow through the fin on a scrap piece of flooring. Use the forefinger of one hand on the top flat portion of the tip to guide and ensure proper fin penetration. Use the other hand to control sealer flow. Hold the bottle at approximately a 45° angle.
